ACID XPress Checklist (Preliminary)

  1. Run ACID XPress
  2. Open project or create new project
  3. Locate loops folder and navigate around it
  4. Set project tempo and key
  5. Preview loops and stop preview playback
  6. Create new loop track
  7. Enable snapping and set snap grid resolution
  8. Draw loop
  9. Change loop length
  10. Change loop starting position
  11. Move loop
  12. Use the play/stop/rewind buttons (also use the spacebar to start/stop playback)
  13. Change the playback starting position (i.e. move the cursor)
  14. Set volume for a track
  15. Set pan for a track
  16. Solo a track
  17. Mute a track
  18. Set project volume to avoid distortion and clipping
  19. Save project file
  20. Render project as an audio file
Instructor: John Meschi
Office: Room 204, Fine Arts Center
(516) 299-2105 (Office)
(516) 299-2474 (Department)
E-mail: jmeschi@liu.edu
Office hours by appointment